View N04L163WC1C_139156.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

NanoAmp Solutions, Inc. 1982 Zanker Road, San Jose, CA 95112 ph: 408-573-8878, FAX: 408-573-8877 www.nanoamp.com
N04L163WC1C
Advance www..com Information
4Mb Ultra-Low Power Asynchronous CMOS SRAM
256K x 16 bit Overview
The N04L163WC1C is an integrated memory device containing a 4 Mbit Static Random Access Memory organized as 262,144 words by 16 bits. The device is designed and fabricated using NanoAmp's advanced CMOS technology to provide both high-speed performance and ultra-low power. The device operates with a single chip enable (CE) control and output enable (OE) to allow for easy memory expansion. Byte controls (UB and LB) allow the upper and lower bytes to be accessed independently. The N04L163WC1C is optimal for various applications where low-power is critical such as battery backup and hand-held devices. The device can operate over a very wide temperature range of -40oC to +85oC and is available in JEDEC standard packages compatible with other standard 256Kb x 16 SRAMs.
Features
* Single Wide Power Supply Range 2.2 to 3.6 Volts * Very low standby current 2.0A at 3.0V (Typical) * Very low operating current 1.5mA at 3.0V and 1s (Typical) * Simple memory control Single Chip Enable (CE) Byte control for independent byte operation Output Enable (OE) for memory expansion * Low voltage data retention Vcc = 1.5V * Very fast output enable access time 25ns OE access time * Automatic power down to standby mode * TTL compatible three-state output driver * Compact space saving BGA package available * Ultra Low Power Sort Available
Product Family
Part Number N04L163WC1CZ1 N04L163WC1CT1 Package Type VFBGA Pb-Free 44-TSOP II Pb-Free Operating Temperature -40oC to +85oC Power Supply (Vcc) 2.2V - 3.6V Speed Options 55ns Standby Operating Current Current (ISB), Typical (Icc), Typical 2 A 1.5 mA @ 1MHz
Pin Configurations
A4 A3 A2 A1 A0 CE I/O0 I/O1 I/O2 I/O3 VCC VSS I/O4 I/O5 I/O6 I/O7 WE A17 A16 A15 A14 A13 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 PIN ONE 44 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 25 24 23 A5 A6 A7 OE UB LB I/O15 I/O14 I/O13 I/O12 VSS VCC I/O11 I/O10 I/O9 I/O8 NC A8 A9 A10 A11 A12
Pin Descriptions
1 A B C D E F G H
LB I/O8 I/O9 VSS VCC
2
OE UB I/O10 I/O11
3
A0 A3 A5 A17
4
A1 A4 A6 A7 A16 A15 A13 A10
5
A2 CE I/O1 I/O3 I/O4 I/O5 WE A11
6
NC I/O0 I/O2 VCC VSS I/O6 I/O7 NC
Pin Name A0-A17 WE CE OE LB UB I/O0-I/O15 VCC VSS NC DNU
Pin Function Address Inputs Write Enable Input Chip Enable Input Output Enable Input Lower Byte Enable Input Upper Byte Enable Input Data Inputs/Outputs Power Ground Not Connected Do Not Use
N04L163WC1C TSOP - II
I/O12 DNU A14 A12 A9
I/O14 I/O13 I/O15 NC NC A8
48 Pin VFBGA (top) 6 x 8 mm
Stock No. 23373-C 1/05 The specifications of this device are subject to change without notice. For latest documentation see http://www.nanoamp.com.
1
N04L163WC1C
NanoAmp Solutions, Inc. Functional Block Diagram Advance www..com Information
Address Inputs A0 - A3
Word Address Decode Logic
Address Inputs A4 - A17
Page Address Decode Logic
16K Page x 16 word x 16 bit RAM Array
Input/ Output Mux and Buffers
Word Mux
I/O0 - I/O7
I/O8 - I/O15 CE WE OE UB LB
Control Logic
Functional Description
CE H X L L L WE X X L H H OE X X X3 L H UB X H L1 L1 L1 LB X H L1 L1 L
1
I/O0 - I/O151 High Z High Z Data In Data Out High Z
MODE Standby2 Standby2 Write3 Read Active
POWER Standby Standby Active Active Active
1. When UB and LB are in select mode (low), I/O0 - I/O15 are affected as shown. When LB only is in the select mode only I/O0 - I/O7 are affected as shown. When UB is in the select mode only I/O8 - I/O15 are affected as shown. 2. When the device is in standby mode, control inputs (WE, OE, UB, and LB), address inputs and data input/outputs are internally isolated from any external influence and disabled from exerting any influence externally. 3. When WE is invoked, the OE input is internally disabled and has no effect on the circuit.
Capacitance1
Item Input Capacitance I/O Capacitance Symbol CIN CI/O Test Condition VIN = 0V, f = 1 MHz, TA = 25oC VIN = 0V, f = 1 MHz, TA = 25oC Min Max 10 10 Unit pF pF
1. These parameters are verified in device characterization and are not 100% tested
Stock No. 23373-C 1/05 The specifications of this device are subject to change without notice. For latest documentation see http://www.nanoamp.com.
2
N04L163WC1C
NanoAmp Solutions, Inc. Absolute Maximum Ratings1
Item Voltage on any pin relative to VSS Voltage on VCC Supply Relative to VSS Power Dissipation Storage Temperature Operating Temperature Soldering Temperature and Time Symbol VIN,OUT VCC PD TSTG TA TSOLDER Rating -0.3 to VCC+0.3 -0.3 to 4.5 500 -65 to 150 -40 to +85 260oC, 10sec Unit V V mW
o
Advance www..com Information
C
oC oC
1. Stresses greater than those listed above may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operating section of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability.
Operating Characteristics (Over Specified Temperature Range)
Item Supply Voltage Data Retention Voltage Input High Voltage Input Low Voltage Output High Voltage Output Low Voltage Input Leakage Current Output Leakage Current Read/Write Operating Supply Current @ 1 s Cycle Time2 Read/Write Operating Supply Current @ fmax Maximum Standby Current Symbol VCC VDR VIH VIL VOH VOL ILI ILO ICC1 ICC2 Chip Disabled Vcc = 2.2V to 2.7V Vcc = 2.7V to 3.6V Vcc = 2.2V to 2.7V Vcc = 2.7V to 3.6V IOH = -0.1mA, Vcc = 2.20V IOH = -1.0mA, Vcc = 2.70V IOL = 0.1mA, Vcc = 2.20V IOL = 2.1mA, Vcc = 2.70V VIN = 0 to VCC OE = VIH or Chip Disabled VOUT = 0 to VCC VCC=3.6 V, VIN=VIH or VIL Chip Enabled, IOUT = 0 VCC=3.6 V, VIN=VIH or VIL Chip Enabled, IOUT = 0 VIN = VCC or 0V Chip Disabled tA= 85oC, VCC = 3.6 V Vcc = 1.5V, CE Vcc - 0.2V, VIN Vcc - 0.2V or VIN 0.2V -L -L -1 -1 1.5 1.5 8 8 2.0 -L 2.0 Test Conditions Min. 2.2 1.5 1.8 2.2 -0.3 -0.3 2.0 2.4 0.4 0.4 1 1 3.0 3.0 15.0 10.0 12 8 9 -L 6 A VCC+0.3 VCC+0.3 0.6 0.8 Typ1 3.0 Max 3.6 Unit V V V V V V A A mA mA
ISB1
Maximum Data Retention Current
IDR
A
1. Typical values are measured at Vcc=Vcc Typ., TA=25C and are not 100% tested. 2. This parameter is specified with the outputs disabled to avoid external loading effects. The user must add current required to drive output capacitance expected in the actual system.
Stock No. 23373-C 1/05 The specifications of this device are subject to change without notice. For latest documentation see http://www.nanoamp.com.
3
N04L163WC1C
NanoAmp Solutions, Inc. Timing Test Conditions
Item Input Pulse Level Input Rise and Fall Time Input and Output Timing Reference Levels Output Load Operating Temperature 0.1VCC to 0.9 VCC 1V/ns 0.5 VCC CL = 50pF -40 to +85 oC
Advance www..com Information
Timing
Item Read Cycle Time Address Access Time Chip Enable to Valid Output Output Enable to Valid Output Byte Select to Valid Output Chip Enable to Low-Z output Output Enable to Low-Z Output Byte Select to Low-Z Output Chip Disable to High-Z Output Output Disable to High-Z Output Byte Select Disable to High-Z Output Output Hold from Address Change Write Cycle Time Chip Enable to End of Write Address Valid to End of Write Byte Select to End of Write Write Pulse Width Address Setup Time Write Recovery Time Write to High-Z Output Data to Write Time Overlap Data Hold from Write Time End Write to Low-Z Output
Note: 1. Full device AC operation assumes a 100us ramp time from 0 to Vcc(min) and 200us wait time after Vcc stablization. 2. Full device operation requires linear Vcc ramp from VDR to Vcc(min) 100us or stable at Vcc(min) 100us.
Symbol tRC tAA tCO tOE tLB, tUB tLZ tOLZ tLBZ, tUBZ tHZ tOHZ tLBHZ, tUBHZ tOH tWC tCW tAW tLBW, tUBW tWP tAS tWR tWHZ tDW tDH tOW
-55 Min. 55 55 55 25 55 10 5 10 0 0 0 10 55 40 40 40 40 0 0 20 25 0 10 20 20 20 Max.
Units
ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns ns
Stock No. 23373-C 1/05 The specifications of this device are subject to change without notice. For latest documentation see http://www.nanoamp.com.
4
N04L163WC1C
NanoAmp Solutions, Inc. Timing of Read Cycle (CE = OE = VIL, WE = VIH)
tRC Address tAA tOH
Advance www..com Information
Data Out
Previous Data Valid
Data Valid
Timing Waveform of Read Cycle (WE= VIH)
tRC Address
tAA tCO
tHZ
CE
tLZ tOE
tOHZ
OE tOLZ tLB, tUB LB, UB tLBLZ, tUBLZ Data Out High-Z tLBHZ, tUBHZ Data Valid
Stock No. 23373-C 1/05 The specifications of this device are subject to change without notice. For latest documentation see http://www.nanoamp.com.
5
N04L163WC1C
NanoAmp Solutions, Inc. Timing Waveform of Write Cycle (WE control)
tWC Address tAW tCW CE tLBW, tUBW LB, UB tAS WE tDW High-Z Data In tWHZ Data Out High-Z tDH tWP tWR
Advance www..com Information
Data Valid tOW
Timing Waveform of Write Cycle (CE Control)
tWC Address tAW CE tAS tLBW, tUBW LB, UB tWP WE tDW Data In tLZ Data Out tWHZ tDH tCW tWR
Data Valid
High-Z
Stock No. 23373-C 1/05 The specifications of this device are subject to change without notice. For latest documentation see http://www.nanoamp.com.
6
N04L163WC1C
NanoAmp Solutions, Inc. Data Retention Characteristics
Parameter VDR ICCDR tCDR tR Description Vcc for Data Retention Data Retention Current Chip Deselect to Data Retention Time Operation Recovery Time Vcc = 1.5V, CE Vcc - 0.2V, VIN Vcc - 0.2V or VIN 0.2V -L 0 tRC Condition Min 1.5 9 6 Typ Max Unit V A ns ns
Advance www..com Information
Data Retention Waveform
Data Retention Mode Vcc Vcc(min) tCDR CE or LB/UB VDR 1.5V Vcc(min) tR
Stock No. 23373-C 1/05 The specifications of this device are subject to change without notice. For latest documentation see http://www.nanoamp.com.
7
N04L163WC1C
NanoAmp Solutions, Inc. 44 TSOP II Package (Z44)
18.571 18.313
Advance www..com Information
10.262 10.058
11.938 11.735
0.80 BSC
0.40 0.30
SEE DETAIL B
DETAIL B
1.194 0.991
0.210 0.120
0o-5o 0.150 0.050 0.597 0.406
Note: 1. All dimensions in inches (Millimeters)
Stock No. 23373-C 1/05 The specifications of this device are subject to change without notice. For latest documentation see http://www.nanoamp.com.
8
N04L163WC1C
NanoAmp Solutions, Inc. VFBGA Package
A1 BALL PAD CORNER (3) D 0.230.05 1.00 MAX 1. 0.300.05 DIA. E 2. SEATING PLANE - Z 0.15 Z 0.05 TOP VIEW SIDE VIEW 1. DIMENSION IS MEASURED AT THE A1 BALL PAD MAXIMUM SOLDER BALL DIAMETER. CORNER PARALLEL TO PRIMARY Z. 2. PRIMARY DATUM Z AND SEATING PLANE ARE DEFINED BY THE SPHERICAL CROWNS OF THE SOLDER BALLS. 3. A1 BALL PAD CORNER I.D. TO BE MARKED BY INK. K TYP J TYP e Z
Advance www..com Information
SD
e SE
BOTTOM VIEW
Dimensions (mm)
e = 0.75 D 60.10 E SD 80.10 0.375 SE 0.375 J 1.125 K 1.375 BALL MATRIX TYPE FULL
Stock No. 23373-C 1/05 The specifications of this device are subject to change without notice. For latest documentation see http://www.nanoamp.com.
9
N04L163WC1C
NanoAmp Solutions, Inc. Ordering Information Advance www..com Information
N04L163WC1CX-XX I L
L = Ultra Low Power Sort I = Industrial Temp -40 to 85oC 55 = 55ns
Performance
T1 = 44-pin TSOP II Pb-Free Package
Package Type
Z1 = 48-ball VFBGA Pb-Free Package
Revision History
Revision # A B C Date Oct 6. 2004 Nov 8. 2004 Jan 14. 2005 Change Description Initial Preliminary Release General Update General Update
(c) 2001 - 2002 Nanoamp Solutions, Inc. All rights reserved. NanoAmp Solutions, Inc. ("NanoAmp") reserves the right to change or modify the information contained in this data sheet and the products described therein, without prior notice. NanoAmp does not convey any license under its patent rights nor the rights of others. Charts, drawings and schedules contained in this data sheet are provided for illustration purposes only and they vary depending upon specific applications. NanoAmp makes no warranty or guarantee regarding suitability of these products for any particular purpose, nor does NanoAmp assume any liability arising out of the application or use of any product or circuit described herein. NanoAmp does not authorize use of its products as critical components in any application in which the failure of the NanoAmp product may be expected to result in significant injury or death, including life support systems and critical medical instruments.
Stock No. 23373-C 1/05 The specifications of this device are subject to change without notice. For latest documentation see http://www.nanoamp.com.
10

▲Up To Search▲

Price & Availability of N04L163WC1C

	To Download N04L163WC1C Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .